The tools used to create cast concrete include an adapter or bucket used for lifting materials, shovels for picking up ready-made materials and doughs, then spooning cement or chips to put the cast dough on the desired spot. If you want to test the concrete casts, you can use a tool called a slump. The concrete casting work process is done manually using human power if the required cast dough is small. If there are many people, you must use a machine. Meanwhile, perhaps you also need to check out the reliable Concrete pump hire Essex.
Once all the tools and materials are available the next step is to make the concrete dough. Before mixing with water, all the materials are stirred first together. If there are still certain colors such as black, it means that there is still sand that has not been stirred. Similarly, if there is still a striking gray color, it is a sign if there is still cement that has not come mixed. So this dough should be a single color gray only blackish.
Then, to note the composition and comparison must be observed carefully so that no errors occur. Each type of dak or cast concrete has a different composition standard according to its function and usage.
If you want to know how to mix the material well by manual, first the sand is placed on a container or place and made in such a way that it looks like a hill. Then mix this material with small stones or gravel and stir it with a hoe and shovel until it blends and is made like a small mountain again.
After that, the top or top made a hole that is wide enough as the crater. The next step of this crater pit was given cement. After that, the material below can be raised upward with the hoe so that the material in the middle and top will go down. Lift this section again with the same technique. This work is carried out continuously until all materials can blend together and do not bring up certain colors.